WIZ750SR is the protocol converter that transmits the data sent by serial equipment as TCP/IP data type, and converts back the TCP/IP data received through the network into serial data to transmit back to a serial equipment.
WIZ750SR is designed to be compatible with the series WIZ107 / 108SR, offers four user I/O pins that can be programmable.
WIZ750SR is the best fit solution to control user’s serial device via Ethernet network.
Features
-
Serial to Ethernet Module based on W7500P MCU
-
Software and Hardware compatible with WIZ107/108SR S2E Module
-
The Modules produced in three forms on one-type PCB board
-
WIZ750SR-TTL: TTL Version
-
WIZ750SR-RS232: RS-232 Version
-
WIZ750SR-RS485: RS-485/422 Version
-
-
10/100Mbps Ethernet & Up to 230kbps serial speed
-
Pin-header(2×6) type & RJ-45 connector mounted module
-
4-Pins Configurable User’s I/O
-
Status pins: PHY link status / TCP connection status
-
Serial signals(RS-232 or RS-422/485 transceiver optionally built-in)
-
RS-232/TTL version: TXD, RXD, RTS, CTS
-
RS-422/485 version: 485+/RXD+, TXD+, 485-/RXD-, TXD-, 485_SEL
-
Optional DTR/DSR signals supported (Status pins or DTR/DSR pins selectable)
-
-
Separate Data UART and Debug UART port
-
Support password function for the security
-
Support the configuration method of serial AT commands & Configuration tool program
-
Support WIZ VSP (Virtual Serial Port) program
-
Built in 10/100Mbps Ethernet ESD Protection IC
-
Built in Supervisor IC for improvements of Reset function stability
-
PCB Board design 45mm X 30mm (Length x Width)
-
Compact sized design 48mm X 30mm X 18mm (Length x Width x Height)
Be the first to review “WIZ750SR-232”